cab mount question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

paintpyro · 09-09-2003, 10:42 AM

Last night I started to swap out my cab and radiator core mounts with a kit from the Truck Shop. Mine had been swapped out by P.O. with a 3 inch body lift

. Out of the 6 bolts, 2 are thicker than the other 4. Anybody know which ones should be the thick ones? Also, when I test fitted the core support, the bolts in the kit look too long, the threads dont seem to go all the way up to the bottom of the lower cushion. Am I missing something here? Is it a bad kit? Im tryin to have the truck back on the road by Friday and I'm gettin nervous

09-09-2003, 10:42 AM	#1
paintpyro Registered User Join Date: Aug 2001 Location: Santa Fe Springs, CA,USA Posts: 1,579	cab mount question Last night I started to swap out my cab and radiator core mounts with a kit from the Truck Shop. Mine had been swapped out by P.O. with a 3 inch body lift . Out of the 6 bolts, 2 are thicker than the other 4. Anybody know which ones should be the thick ones? Also, when I test fitted the core support, the bolts in the kit look too long, the threads dont seem to go all the way up to the bottom of the lower cushion. Am I missing something here? Is it a bad kit? Im tryin to have the truck back on the road by Friday and I'm gettin nervous __________________ 70 shortbed stepside "Schleprock" 350 w/TH400 rallys and BFGs -We can rebuild it, we have the technology-lower,shinier,faster Last edited by paintpyro; 09-09-2003 at 11:24 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.