![]() |
![]() |
#1 |
C35 Crew Dually
Join Date: Nov 2008
Location: Belleville Ontario
Posts: 1,116
|
Having a bad day
today is not my day to work on my truck.
on the to do list today was put in oil and temp sensors so i could get my dash working again (easy enough right) wrong lol temp sensor is way smaller then the hole in the t stat housing and needed an adapter (trip to the parts store) so finally got that in. moved on to oil press sensor. pulled old one (but had to pull the distributor to do so :S ) got it out then went to put the new one it (doesn't fit too big) so off to the parts store got the right one. came back went to install it.... wont fit because it hits on the intake (at this point I'm not pleased) so i go get a 40 degree elbow,try and screw it in wont work so i go get an extension and an adapter. get back goes together like butter (yay things are starting to go back together!) so now its time to put the distributor back in (i didn't pull it out just up and slightly out of the way) so I'm re installing it it wont seat back down in so me being the forgetful person that I am I forgot to make sure the oil pump shaft was lined up so got that all figured out and now its all back together and wont fire! My buddy's coming over to help me look it over but i just wanted to share my day :s TGIF!
__________________
If it aint square, I don't care. 84 C35 CC Dually Project log... http://67-72chevytrucks.com/vboard/s...d.php?t=414892 |
![]() |
![]() |
Bookmarks |
|
|