The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Engine & Drivetrain

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 03-14-2012, 11:57 PM   #1
todd99
Registered User
 
Join Date: Feb 2011
Location: prescott, az
Posts: 225
700R4 Failure

I need your help.

The 700r4 in my truck failed after about 8,000 miles. I lost 3rd and 4th gear, so I am assuming that the clutch pack is shot.

What I am trying to figure out is why did it fail so quickly?


I have three theories:

1. improperly adjusted tv cable

2. at somewhere between 400-500hp it may be too much motor

3. improperly wired tcc solenoid - my reason for this is that when I bought the transmission the guy that rebuilt it swore up and down that it only needed to be connected to a keyed 12v source. Saying that no switches were necessary and the transmission would unlock on it's own. Everything on the internet says contrary, but he has been building for transmissions for a long time.

So what do you guys think?
What is your opinion on the tcc solenoid?
And lastly at 8,000 miles do you think I need to replace the torque converter when I rebuild the transmission?

-Thanks
__________________
1971 C20 Longhorn Custom Camper
todd99 is offline   Reply With Quote
 

Bookmarks

Tags
700r4, c10, clutch, torque converter, transmission


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:22 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com