|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
|
|
Thread Tools | Display Modes |
03-21-2012, 11:59 AM
|
#1 |
|
Registered User
 Join Date: Nov 2007
Location: Hermiston, OR
Posts: 947
|
4x4 hub covers, console lid
I have a set of great looking hub covers. There are a few scuffs in the chrome but these were in really good shape. There is only one ding and it is on one of the rear ones. It is in the 1st pc on the RH. Does not stand out very much. These were on a 3/4 ton and I am not sure if the hubs are different sizes between 1/2 and 3/4. Large opening for the original spicer hubs, if yours have been converted to the skinnier warn hubs they will not fill it out well and I believe this is why they were not ran long as mine were changed over. Stickers on rears say "modern" and are a little worn, you will probably want to remove and replace with bowties anyway. $30 shipped.
  I have a console lid with bowtie emblem. The grain is in good shape and it includes the hinge and the cable. Sale Pending to Truckseats,
__________________
Running in place gets you nowhere fast. -me 1968 GTO 4-spd covnvertible 1970 K-20 4-speed, factory AC. Last edited by webfoot; 03-22-2012 at 01:25 PM. |
|
|
| Bookmarks |
|
|
Threaded Mode