Vacuum Source for Brakes. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

THE "10" SILVERADO · 03-23-2012, 07:12 PM

Just got a new never used Edelbrock 1406 carb for my truck. Basically bought and then never installed because the project got sold. Problem is, they had time to put a alan-bolt in the back port for power brakes. Lock-tite too. My dad (who is really strong) can't even brake it loose. Would it be possible to run the power brake line to the manifold (edelbrock 2701 performer eps)? I'd like to run them to the manifold because I plan on using the PCV valve port on the front for the PCV.

Thanks,
Michael

03-23-2012, 07:12 PM	#1
THE "10" SILVERADO Registered User Join Date: Sep 2010 Location: Marble Falls, TX Posts: 1,575	Vacuum Source for Brakes. Just got a new never used Edelbrock 1406 carb for my truck. Basically bought and then never installed because the project got sold. Problem is, they had time to put a alan-bolt in the back port for power brakes. Lock-tite too. My dad (who is really strong) can't even brake it loose. Would it be possible to run the power brake line to the manifold (edelbrock 2701 performer eps)? I'd like to run them to the manifold because I plan on using the PCV valve port on the front for the PCV. Thanks, Michael __________________ Michael Re-starting the neglected '77...http://67-72chevytrucks.com/vboard/s...=425464&page=9



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.