Project: LS1ick68 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

68Stepbed · 03-29-2012, 07:40 AM

I sure will. I can't beleive how expensive headers are, so I was surprised to see the price on these. They look like good quality peices, so I don't expect any issues. I'll test fit them first, then have them ceramic coated. I can get them coated locally for $140.

That'll put me into a set of coated stainless headers for under $400.

I also ordered my 4.10 ring & pinion yesterday, and these little boogers for the steam holes. I ordered 2 blanks for the rear, and two with 1/8" NPT ports. I'll probably drill and tap an 1/8" port in the water pump, and either use -4AN hose or 1/4" brake line for plumbing.

03-29-2012, 07:40 AM	#11
68Stepbed Registered User Join Date: Mar 2005 Location: 10-Uh-See Posts: 5,609	Re: Project: LS1ick68 I sure will. I can't beleive how expensive headers are, so I was surprised to see the price on these. They look like good quality peices, so I don't expect any issues. I'll test fit them first, then have them ceramic coated. I can get them coated locally for $140. That'll put me into a set of coated stainless headers for under $400. I also ordered my 4.10 ring & pinion yesterday, and these little boogers for the steam holes. I ordered 2 blanks for the rear, and two with 1/8" NPT ports. I'll probably drill and tap an 1/8" port in the water pump, and either use -4AN hose or 1/4" brake line for plumbing. __________________ Matt 68 C10 stepside, LS1/700R4, TCI Engineering suspension system Last edited by 68Stepbed; 03-29-2012 at 08:20 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.