Upper control arm Bolts! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

desertnick69 · 04-22-2012, 01:22 AM

I have gotten into the front end of my 69 chevy C-20 on a 71 frame. Need to replace it all. The drivers side every thing went smooth (as could be expected) The passanger side i had to cut off the upper control arm bolts.
These bolt are serrated and there is NO backing plate, the holes in the frame seems to be a bit out of round and a bit oversized. Whats the fix? weould send pics but don,t have working camera. Sorry guys)

04-22-2012, 01:22 AM	#1
desertnick69 Registered User Join Date: Jan 2012 Location: Phoenix, Arizona Posts: 500	Upper control arm Bolts! I have gotten into the front end of my 69 chevy C-20 on a 71 frame. Need to replace it all. The drivers side every thing went smooth (as could be expected) The passanger side i had to cut off the upper control arm bolts. These bolt are serrated and there is NO backing plate, the holes in the frame seems to be a bit out of round and a bit oversized. Whats the fix? weould send pics but don,t have working camera. Sorry guys)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.