Help with Lifter Choice

[Rannos]

I am building a street/strip SBC with a solid roller cam. I have a set of comp cams solid roller lifters w/o the bearing oiling provisions already but have been getting mixed advice on what I should run. The truck the motor is going in will see less then 1000 miles a year and most likely not more then 50 miles in a weekend. It will mostly be for index/bracket racing and hitting the local car shows maybe 2 times a month. My springs set up with 155# on the seat and about 430# open and the engine will likely never see anything over 6500rpm. I am not running oil restrictors and have been told if not running restrictors and with my lower spring pressure not to worry about it. I have also been told with out something like the HIPPO or Endure-X style lifters the low rpm of street driving will kill the needle bearings. I have never used a solid roller for street use before so I have no exprience myself to guide my decision. What do most of you run in street/strip engines? Will my current lifters suffice or should I get the HIPPO/ENFURE-X style?

Thanks,
Jay