![]() |
Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
![]() Join Date: Oct 2009
Location: Burbank,California
Posts: 285
|
Radiator help / Fan shroud
Somebody must have run into this issue. I have a new radiator CU369.
My truck is a 69 3/4 ton with a 396. I have the big block correct fan shroud. Radiator seems 1" too high because shroud will not reach upper and lower mounting points. I even took the rubber pads out and still too high. The top brackets seem to be at a touch of an upward angle indicating an issue. The radiator is the same size as the one I took out but there was not a shroud when I bought the truck. So if i attach the shroud to the upper brackets, it sits too high and cant get lower screws in. Also fan blades rubs bottom of shroud. Somebody else has to have run into this before. Big block guys here is the question if you're truck has a shroud..... 1. What is the height of your radiator? 2. What is the diameter of your fan blade? 3. Any Pictures?? Really appreciate any input |
![]() |
![]() |
Bookmarks |
|
|