05-24-2012, 05:54 PM | #1 |
Registered User
Join Date: Jul 2004
Location: central KS
Posts: 18
|
carb mounting torque?
I'd recently asked about a carb running rich, and leaking gas--when shut off.
Just finished putting a kit in the carb, and it still leaks--from the left side, somewhere near the throttle shaft. I'm kind of paranoid about cranking down on the 4 mounting bolts as I've read about warping the carb. I checked the surfaces when I had it apart, and though not dead flat, it looked to be within a couple thou most spots. Is there a suggested mounting torque? Maybe it's already too tight? Thanks. (On the plus side, it does seem to idle better, at least for the brief time it's been run.) |
Bookmarks |
|
|