Can't get my Aeroquip A/C lines to stop leaking - The 1947 - Present Chevrolet & GMC Truck Message Board Network

AusTx68 · 06-10-2012, 04:36 PM

I plumbed my Vintage Air system using Aeroquip A/C lines. My #6 and #10 lines seal with no problem. The #8 coming off the high side of the compressor has been driving me crazy. I have two fittings leaking on the back side of the fitting where the hose enters (red circle). I pulled it apart and reassembled it with no luck. I had other leaks in this same section of hose. When I fixed those these popped up. I made sure to replace the o-rings when I took it apart. If I move the hose there is a small hissing noise in the circled areas.

Is there a trick to getting these fittings to seal?

06-10-2012, 04:36 PM	#1
AusTx68 Registered User Join Date: Nov 2008 Location: Italy Posts: 1,278	Can't get my Aeroquip A/C lines to stop leaking I plumbed my Vintage Air system using Aeroquip A/C lines. My #6 and #10 lines seal with no problem. The #8 coming off the high side of the compressor has been driving me crazy. I have two fittings leaking on the back side of the fitting where the hose enters (red circle). I pulled it apart and reassembled it with no luck. I had other leaks in this same section of hose. When I fixed those these popped up. I made sure to replace the o-rings when I took it apart. If I move the hose there is a small hissing noise in the circled areas. Is there a trick to getting these fittings to seal? __________________ '68 C-10 SWB 383 Stroker (Sold 3/2/2013) '87 R2500 LWB 454 TBI converted to Carb



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.