|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
|
|
Thread Tools | Display Modes |
06-17-2012, 07:46 PM
|
#1 |
|
Registered User
 
Join Date: Oct 2006
Location: Southern Kalifornia
Posts: 3,066
|
Help me lower a ....Longhorn
Ok, today I scored a set of BellTech drop spindles from an '84 1ton dually. I know the spindles are the same for dually and non dually. I also looked up the ball joints for a '71 and an '84 and they are the same for a 1ton and 3/4ton. BUT my truck is a '70!
I plan on the non-dually disc brakes(of course),but these spindles have slide on calipers (had hydroboost) that use a wedge to secure the caliper to the spindle. So I plan on getting the calipers for the spindles and a master cylinder to match. My question is can I use that master cylinder with my stock vacuum booster? Or do I have to go hydroboost? I hope this all makes sense. Thanks OH..also can I use my stock upper and lower A-arms and just change out the ball joints to the newer ones? Thanks
__________________
------------------------------------------------------ -Lance 2000 Chevy C2500, 5.7, 4L80e 1999 Suburban K2500, 7.4, 4L80e 1980 Camaro..son's car...PROJECT |
|
|
| Bookmarks |
|
|
Threaded Mode