alignment results

[75chev4x4]

Hey guys been working through a wandering problem with my 75 k20 truck and wanted to see what you guys thought about my aligmnet specs. Since I have had this truck it has always wandered around going down the road. I have replaced the ball joints, tre, dre, leaf springs 2" lift all the way around, borgeson steering shaft, new steering box, shocks, steering stabalizer, drop pitman arm so the drag link is flat, had the tires balanced, and had it aligned. Long story short the thing is still all over the road and not fun to drive. I'm trying to figure out what else could be wrong that I'm overlooking otherwise I'm going to get rid of it cause I'm into this thing 8k and its still drives poor at best. Anyway wanted to put up my alignment specs from last week when I had it in to be aligned. No other work has been done to it except for the borgeson shaft I just put on.

Left front
Camber 0.3 degrees
Caster 3.7 degrees
Toe 0.19 degrees

Right front
Camber 0.5 degrees
Caster 3.9 degrees
Toe 0.20 degrees

Total toe 0.39 degrees
Steer ahead -0.01 degrees

Does this seem about right for this truck with a 2" lift? Tires are 265/75/16, thanks for looking!