Quick question-need quick awnser

[67cst]

i got another propane question, first off, i put a new rad in the truck today, the old one had a fitting for one of the heater hoses and the other went to the condenser (on propane) then intake, well my new rad doesnt have the fitting so im going to have to go to the water pump, the water pump is plugged with a massive set screw deal that has an allen head top on it, what i want to know is i have the one heater hose blocked off because the new rad doesnt have the fitting and i dont have the fitting to thread into the water pump. will this harm the condenser? i took the truck for a spin tonight after putting the rad in and when i got home i popped the hood to make sure all was good and antifreeze was dripping out of the condenser where the 2 haves join. and i also noticed the condenser was very cold. i think this should go away when i get the heater hose hooked up to the water pump because the anti freeze will flow. but until i do that, like tomorrow morning i need to get to work and ill get the parts on the way home kinda thing, but should it be okay to drive? what bad could happen if anything? hopefully someone can help me because its late now and im going to work first thing....thanks in advance


Derek