Good evening everyone!!! Ok I was on lunch at work admiring my square and already noticed that the gap between the hood and the driver side fender is wider on that side than the passenger side, so I figured that I just need to buy new hood mounts bc they may be bent... ok no biggie there... The problem that i noticed is that the door doesnt close all the way on either side even when i slam the doors. also noticably that at the top of the doors the spacing is quite wider around the top of the wing glass than the actual spacing around the door. so in lamens terms the doors are sitting coc eyed in when they are shut,... so what i did i opened both the doors and grabbed them from the bottom and side and pushed up and down on them and noticed that where the top door mounting bracket is that are loose on the top. so if you actually hold the door where it doesnt fall and slowly shut it without shutting it seems to even out the door gaps. so i guess my question is,,, is there a screw that tightens the door up on the mount or is there some kind of spacer that might be worn out on each of the doors. thanks for all advice...
06-28-2012, 09:20 PM
Threaded Mode