400" 4-Bolt with .030" over Forged TRW's - The 1947 - Present Chevrolet & GMC Truck Message Board Network

GSXMEN · 10-01-2003, 11:52 PM

I have a 400" 4-bolt main shortblock with the following done to it:

*.030" over TRW forged pistons (new - part # L2352F 30)[.083" dish - 9.9:1 compression with 64cc heads]
*400" crank turned .010"/.010"
*400" rods resized
*Pistons installed on rods
*Crower hyd. cam (new - Part # 00670, grind # B268h) [Dur: 268* Lift: .450" w/1.5 ratio]
*New cam, main, rod bearings & rings
*Cam bearings installed

**Price $1000 plus shipping**

Price reduced to $800 - $750 without cam

10-01-2003, 11:52 PM	#1
GSXMEN Registered User Join Date: Aug 2002 Location: Upstate, NY Posts: 337	400" 4-Bolt with .030" over Forged TRW's I have a 400" 4-bolt main shortblock with the following done to it: .030" over TRW forged pistons (new - part # L2352F 30)[.083" dish - 9.9:1 compression with 64cc heads] 400" crank turned .010"/.010" 400" rods resized Pistons installed on rods Crower hyd. cam (new - Part # 00670, grind # B268h) [Dur: 268 Lift: .450" w/1.5 ratio] New cam, main, rod bearings & rings Cam bearings installed Price $1000 plus shipping Price reduced to $800 - $750 without cam __________________ Scott Last edited by GSXMEN; 10-25-2004 at 03:59 PM. Reason: Price Change



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.