Circuit board mod./ Camaro tach - The 1947 - Present Chevrolet & GMC Truck Message Board Network

TobyArnot · 07-15-2012, 11:46 AM

I used this FAQ link to do a Camaro tach conversion [Props to Gringoloco]:
.
http://67-72chevytrucks.com/vboard/s...d.php?t=251017
.
Fits well, but does have an interference with the stock circuit board. Broke out my breadboard skills and made this mod. Cut out the opening to give room for the tach leads,etc, then spliced in three circuits and covered with a dabble of potting compound. Soldering done on a damp towel to keep the back side cool. Two small pieces of elec. tape on flip side for insurance.

FYI for anyone doing this mod.

07-15-2012, 11:46 AM	#1
TobyArnot Quit if it's not FUN!!! Join Date: Jul 2010 Location: Indian Trail, N.C, Posts: 864	Circuit board mod./ Camaro tach I used this FAQ link to do a Camaro tach conversion [Props to Gringoloco]: . http://67-72chevytrucks.com/vboard/s...d.php?t=251017 . Fits well, but does have an interference with the stock circuit board. Broke out my breadboard skills and made this mod. Cut out the opening to give room for the tach leads,etc, then spliced in three circuits and covered with a dabble of potting compound. Soldering done on a damp towel to keep the back side cool. Two small pieces of elec. tape on flip side for insurance. FYI for anyone doing this mod. Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.