Energy Suspension Body Bushings - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DURG · 07-16-2012, 10:29 PM

Anyone run these on their 60-66? The kit Part# 3-4137 comes with 1/2" bolts and washers for the rear two cab mounts and my stock ones are 7/16" My stock bolts could be re-used, but I shouldn't have to. The rear bolts screw up into a captivated nut in the floor so they have to be 7/16" This means all the washers and spacers for the rear set are oversized too. Again not a big deal as it is only a 1/16" but the kits should be correct for the 50.00 you spend on them.

07-16-2012, 10:29 PM	#1
DURG Registered User Join Date: May 2012 Location: Scarborough ME. Posts: 413	Energy Suspension Body Bushings Anyone run these on their 60-66? The kit Part# 3-4137 comes with 1/2" bolts and washers for the rear two cab mounts and my stock ones are 7/16" My stock bolts could be re-used, but I shouldn't have to. The rear bolts screw up into a captivated nut in the floor so they have to be 7/16" This means all the washers and spacers for the rear set are oversized too. Again not a big deal as it is only a 1/16" but the kits should be correct for the 50.00 you spend on them.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.