Steering knuckle scraping? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

stepside-mitch · 07-20-2012, 11:56 PM

I'm running stock 15x8 rallys and the lower control arm of the spindle is grinding a little bit. Common issue but I also noticed that the steering knuckle digs into wheel. Is this also a common problem? I bought some cheapo 5/16" wheel spacers for the time being but they won't last. I really don't feel like grinding too much off the knuckle. Any help would be greatly appreciated.

By the way, they are McGaughys 2.5" drop spindles. stock springs

07-20-2012, 11:56 PM	#1
stepside-mitch Registered User Join Date: Nov 2011 Location: Chicago, IL Posts: 64	Steering knuckle scraping? I'm running stock 15x8 rallys and the lower control arm of the spindle is grinding a little bit. Common issue but I also noticed that the steering knuckle digs into wheel. Is this also a common problem? I bought some cheapo 5/16" wheel spacers for the time being but they won't last. I really don't feel like grinding too much off the knuckle. Any help would be greatly appreciated. By the way, they are McGaughys 2.5" drop spindles. stock springs



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.