Ride quality with 5 inch drop up front

[87squarebody]

Ok i want to lower my 87 swb with a 5 inch drop up front and was planning on using 3inch bell tech spindels and 2 inch springs to keep as much travel as possible.But in the future as I build my project I want to run a wilwood big brake kit with 14 rotors and with that being said I have to use cpp modular spindels which are only 2inche drop and would have to use a 3 inch spring.Will I have a bad ride quality meaning stiff,bouncy or bottoming out on bump stop.Any recommendations for a good set up would be greately appreciated.