th400 drama, new pics of the madness going on.

[1972_Buford]

So. the cross member was held on with 4 bottom bolts of which only 3 had a nut on it. Nothing on the top rail was bolted. Looking at the bracket from when I started this I noticed it was kind of sagging or one of the bolts was crooked. Just figured it wasn't tightened all the way or it was cross threaded... NOPE. even better, The area where the tranny mount goes is alomst completely cut off and a chunk of it is missing. AWESOME. I didn't notice it at first because it was caked on with sooo much dirt (3rd pic). Found the majority of the tranny leak was from the speedometer missing an O-ring (at least I think that is why).

Anyways. I am replacing the torque converter as when it was running it sounded like there was rocks tumbling around the tranny tunnel. While I have the tranny out I am going to replace the following-
front seal
rear seal
Speedo seal
speedo O-ring
modulator.

If you guys see something I am missing let me know. I am not really touching the tranny too much as it shifted nice and hard and the torque converter was locking up killing the motor.

*also, how are you guys hooking up your kickdown electronics? photos would be nice.