Got hose? Ls swap lower rad hose

[Daaaanz67]

Hi everyone just completed my ls swap on my 69c10. I'm using the stock three core radiator. It has the neck that comes off and angles up at a 45degrees just like the four cores I compared it to. The aluminum adapter is by jags that run. This hose fit like a glove. I also think that since these hoses have enough strait sections after the bends that even if your motor was set back towards the fire wall it will still work.I just wanted to give back to the swappers community as they have provided me with great information. I know there are many options on what people have used, this is what I did. I was lucky to have free rein in the napa/riebies rad hose section and this is what I used. In the first picture I used the adapter on the rightif you carefully measure and cut these hoses the left over pieces are enough for a second.used this protective cover to clean everything up this came on the hoses I purchased.
Posted via Mobile Device