The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Suspension

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 10-01-2012, 12:45 PM   #28
jephs422
Registered User
 
Join Date: Jun 2008
Location: Oxnard CA
Posts: 301
Re: Here's those pics of the under dash pedal assembly

Here's a few images:

Triple remote reservoir for dual master cylinder and single clutch. Please note that these are NOT open vented systems. FULLY sealed, we add the bellow/diaphragm to the reservoir and you get rid of the one in your master cylinder. Systems that are vented to the atmosphere will collect moisture. Cheap units can be had for less, but they are NOT worth it.



Our reservoirs are ported on the bottom as well as the back. You will plug the set you decide to not use. This allows you to run your lines through the firewall, or down it.



Our billet master cylinder lid is ready to use for a remote system, or you can drill/tap your existing lid. Just remember, when switching to a remote reservoir style system, you are overfilling your master cylinder. We highly recommend using our lid because of the tighter fit and use of the OEM gasket for a superior seal.



I don't remember if I ever posted dimensions, but here ya go

dimensionally, the dual with clutch is the same as the single.



__________________
Jeff Savaglio

Scott's Hotrods
Oxnard CA 93030
jephs422 is offline   Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:10 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com