What should I run in the 1/4? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Tom · 10-16-2003, 12:26 PM

Hey guys, Im going to firebird raceway this saterday for a meet I set up on my other board. There will be LOTS of v6 honda accords out there that Im gona have to whoop up on. My truck is going to be the "control" part of our experiment. Im teaching these guys about racing and how it works

So Im curious as to what I should run.

vortec 350 [at the crank it should be 300hp, 380lbs/ft], 2100rpm stall 2004R tranny, 3.07 rear gears, 79 c10. Mods [if you call them that] include HEI module and coil, ramhorn manfolds and dual 2.5" exaust, carter 600cfm carb.

10-16-2003, 12:26 PM	#1
Tom driving is in my blood Join Date: Dec 1999 Location: Mesa AZ Posts: 5,733	What should I run in the 1/4? Hey guys, Im going to firebird raceway this saterday for a meet I set up on my other board. There will be LOTS of v6 honda accords out there that Im gona have to whoop up on. My truck is going to be the "control" part of our experiment. Im teaching these guys about racing and how it works So Im curious as to what I should run. vortec 350 [at the crank it should be 300hp, 380lbs/ft], 2100rpm stall 2004R tranny, 3.07 rear gears, 79 c10. Mods [if you call them that] include HEI module and coil, ramhorn manfolds and dual 2.5" exaust, carter 600cfm carb. __________________ -78 c10 short/step: 388cid, M20, 5/5 drop, lots more. Playtoy and first vehicle. -98 c1500 x-cab: 5.7L, 17" rims, 5/6 drop, flowmaster, helper bags,NBS rear disk brakes. -02 Suburban 4x4: leveled front -CBR600F4i, CBR600RR, CBR1000RR, and standup skis DISCLAIMER: I cant spell for the life of me.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.