Project#1: Bright Horizons - 68 Swb big block on Air!

[68 TT]

Nice work on the roof. I was considering doing the job the same way but my only donor roof is from a small window 67 and this needs to be done to my 69 cab.

It needs both inner & outer skins due to roof mounted service light damage and leaks so I started looking at the way the factory put the cabs together.

I'm looking at drilling out the spot welds on the inner panels to get them out then install the good upper inner skin onto the large back window lower inner section.

Same process for the outer roof skin then reinstall the inner surface assembly.

From the way the parts are assembled I think this is the way the body plant put them together so it should work out OK.