|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
|
|
Thread Tools | Display Modes |
11-09-2012, 06:58 PM
|
#10 |
|
Senior Member
 
Join Date: Mar 2012
Location: Kansas City, MO
Posts: 2,002
|
Re: 68 C10 SBSS build - start to finish
The inner cowl lip that forms the pinchweld flange behind the firewall was rotted out over nearly the full width of the firewall. I couldn't find a patch panel for it, so that meant I'd have to make my own. Out on the ends where I'd sectioned the cowl, I used a stretcher and shrinker to form the curved pieces and then welded them in. After the inner cowl repair on the passenger side was complete, I shot a heavy coat of undercoating on the inside and welded it all together.
__________________
Victor 57 Chevy Wagon - California Dreamin'"Mecum'd" 9/2022 Dallas, TX Crusty Rusty Leaky Squeaky 67 Consigned 4/2019 Dresden, Germany Maybelline - my '57 Ford 2dr Sedan "Mecum'd" 3/2016 Location unknown Silver Streaker "Mecum'd" 4/2013 Somewhere in Texas |
|
|
| Bookmarks |
|
|
Threaded Mode