Ol John Lee gets his rear cylinders reamed and rebuilt

[Sharps40]

Thought we'd do all four wheel cylinders on this job but....as ya can see on the front breaks, pretty good shape and a broken off bleeder screw so we'll leave it alone till its time to replumb this 64 SBSS to dual drum/drum master.





So off to the rear breaks for a wheel cylinder repair or two, but first, tie up the break pedal.



Right rear was leaking a bit....just enough over the last few thousand miles to see the pedal slowely go down. The warning was checking the master and finding only enough juice to bairly cover the ports...not a drop on the outside of the backing plates to indicate a problem.





After knockin off all the goo and grit...



Pretty nasty under the cups too...wonder where all that comes from?