NC TH350 with torque converter - The 1947 - Present Chevrolet & GMC Truck Message Board Network

GCncsuHD · 11-12-2012, 09:26 AM

I have a Turbo 350 transmission I pulled out of a 71 C10 I was parting out. Previous owner said it had been rebuilt approximately 5000mi ago when the engine was also rebuilt. Has a B&M Holeshot torque converter, part number 20416, kickdown cable and speedometer cables still attached, along with cooler lines. I bought the truck non running, the previous owner dropped a bolt in the engine while it was running

so I can't guarantee the condition of the transmission any more than the previous owners word that it had about 5,000mi on it and the gobs of rubber on the rear fenders proving it held

Fluid was cherry red and didn't smell burnt at all.

$300

11-12-2012, 09:26 AM	#1
GCncsuHD Charlie Daniels w/ a Tq Wrench Join Date: May 2009 Location: Statesville, NC Posts: 1,570	TH350 with torque converter I have a Turbo 350 transmission I pulled out of a 71 C10 I was parting out. Previous owner said it had been rebuilt approximately 5000mi ago when the engine was also rebuilt. Has a B&M Holeshot torque converter, part number 20416, kickdown cable and speedometer cables still attached, along with cooler lines. I bought the truck non running, the previous owner dropped a bolt in the engine while it was running so I can't guarantee the condition of the transmission any more than the previous owners word that it had about 5,000mi on it and the gobs of rubber on the rear fenders proving it held Fluid was cherry red and didn't smell burnt at all. $300 __________________ ΜΟΛΩΝ ΛΑΒΕ 67 C10 Shortbed "Great Grandpa's Truck" I6 3 on the Tree 71k original miles 5.3 swap in the works 69 K5 Blazer-Family Beach Cruiser Project 78 K30 Dually Semi-Retired Fire Truck 350/SM465 35"s SOLD01 2500HD ECSB 6.0 4x4 5.13's 8" lift 38"s



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.