Winndshield washer pump - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Bustd Knuckles · 11-12-2012, 10:48 AM

Just re assembling my '72 C/10 after inside out paint and got to the point of re installing my wiper/washer assembly. I rebuilt the washer pump and while I had it on the bench I hooked it up to 12volts and all I got from the washer pump was a click. The cam moved but the plunger didn't . Is this as it should be ? I just used the 2 terminals leading to the pump with the 12 volt jump pack. Want to get this operational before putting the rest of the dash together . Any help would be appreciated.
Posted via Mobile Device

11-12-2012, 10:48 AM	#1
Bustd Knuckles Registered User Join Date: Dec 2011 Location: Hammond,La Posts: 23	Winndshield washer pump Just re assembling my '72 C/10 after inside out paint and got to the point of re installing my wiper/washer assembly. I rebuilt the washer pump and while I had it on the bench I hooked it up to 12volts and all I got from the washer pump was a click. The cam moved but the plunger didn't . Is this as it should be ? I just used the 2 terminals leading to the pump with the 12 volt jump pack. Want to get this operational before putting the rest of the dash together . Any help would be appreciated. Posted via Mobile Device



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.