Rally wheel painting.

[GM-power]

So in the 1st pick you can see that my rallies are in bad shape, that ones a good one. My materials are in the 2nd pic, plus sand paper. I sanded wheel down till completley smooth ,using 220 grit, then applied 1st coat of primer. Between 1st and 2nd coat of primer I wet sanded using 400 grit. 3rd pic is after 2nd primer coat. I did three topcoats follwed by three clear coats. 4th pic is 3rd topcoat before clear. 5th pic is the finished product. Im doing these one at a time because I need to drive my truck. When Im completley finished Im going to get 3in. trim rings, take the center cap paint off, and get some gmc inserts for the caps.
Posted via Mobile Device