71 C20 Custom Camper lowering??

[Mad Viking]

My dad gave me last year his 71 C20 Custom Camper that he bought brand new in 1971. I want to lower it, either a 4/6 or 5/7. The truck has a leaf spring rear suspension. I want to keep the truck with the full 3/4 ton capabilities because I do use it as a truck for hauling material and towing my 24' boat.

I've read all sorts of posts on lowering a 3/4 ton and have seen all sorts of ways to lower the truck. I would like to get a good consensus on what I should do.

I've seen that Airbagit has 3/4 ton drop spindles that I would use for the front with some lowering springs. I've read about cutting the springs but I don't think that's the better way to go.

In the rear I've read of a few ways to go. I can do an axle flip and c-notch the frame. I can pull a couple of springs and install air over leaf bags from Ride Tech. Or, I can remove the leaf springs and install trailing arms.

I would like to make this cost effective while maintaining functionality. I have a lead on a good set of used trailing arms for $125. The Ride Tech air over leaf bags are $250 for the set. Any suggestions would be greatly appreciated.