77' 3/4 Shortstep project.

[Harney Boy]

I've got a 1977 Silverado 20, with a cut and shortened frame. Me and my dad built a 1972 400 small block chevy 4 bolt main. Bought Edelbrock Perormer RPM aluminum 2.02 heads with 64cc combustion chamber, push-rod guide plates, 3 angle valve job and 1.6 roller rockers. And went ahead and got the Edelbrock Performer RPM cam and the Edelbrock Air-Gap intake, Kieth Black flat top pistons, high volume oil pump 7 quart oil pan, steel crank, Holley AED 750 double pumper manual secondary with no choke. We hooked it to a TH400 transmisson and slapped a B&M Holeshot 2500 stall converter. And on the other end of the driveshaft is a FF-14 bolt rearend with either 4.10 or 4.56 gears. I cut 1 coil out of the front springs, and removed 3 out of 9 leafs from the rear. As of right now, ive removed my fenders, hood, doors, and bed along with the interior for rust repair on the cab. Ill be painting the truck sebring silver. Sorry if my pace is slow, ive been building an airboat at the same time.
Posted via Mobile Device