Np-833 - a833 - np440 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Benlugchev · 12-06-2012, 08:28 PM

I bought a 71 c10 and it came with what I believe from my research is a NP-833 - A833 - NP440? Not sure what they are most commonly called in the GM family?

I plan to do and LS swap and I want to keep this same 4sp tranny? Anyone have experience with these and how much power they are good for?

I read an article saying you can use a sachs 1050 flywheel on the LQ4 and an 11" clutch Gm bolt patter.

I think the NP-833 is a 10 spline input shaft, any recommended a good 11" street/strip clutch that will take 500rwhp?

12-06-2012, 08:28 PM	#1
Benlugchev Registered User Join Date: Nov 2012 Location: Connecticut Posts: 99	Np-833 - a833 - np440 I bought a 71 c10 and it came with what I believe from my research is a NP-833 - A833 - NP440? Not sure what they are most commonly called in the GM family? I plan to do and LS swap and I want to keep this same 4sp tranny? Anyone have experience with these and how much power they are good for? I read an article saying you can use a sachs 1050 flywheel on the LQ4 and an 11" clutch Gm bolt patter. I think the NP-833 is a 10 spline input shaft, any recommended a good 11" street/strip clutch that will take 500rwhp? __________________ 71' Chevy C10-Turbo 6.0L-80e-JFR218-738hp/700tq-10.1@133mph... 1.54 60' (3737lbs) 00' GMC-c2500-Turbo 6.0L-80e-JFR212-500hp/560tq -11.67@116mph (5182lbs) Last edited by Benlugchev; 12-06-2012 at 08:30 PM. Reason: add photo



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.