Still having trouble installing Vent window - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Brewski* · 10-25-2003, 11:47 AM

Still can't get it. Do I start from the inside of the door or outside.

71GMC_3/4T You have to rotate it 90 degrees (viewed from the top) and she'll slide in the "notch". Then you rotate it back. The window should be down all the way to get it in there.

Brewski* I am replacing the glass in my passanger side door. The old glass was broken out so getting the vent window assembly out was a breeze. I have the new glass in but can not figure how to get the vent glass back in. The part where it bolts to the inside won't go by the new window. Any help much appreciated.

10-25-2003, 11:47 AM	#1
Brewski* Registered User Join Date: Aug 2001 Location: Rocky Mount, MO Posts: 1,293	Still having trouble installing Vent window Still can't get it. Do I start from the inside of the door or outside. 71GMC_3/4T You have to rotate it 90 degrees (viewed from the top) and she'll slide in the "notch". Then you rotate it back. The window should be down all the way to get it in there. Brewski* I am replacing the glass in my passanger side door. The old glass was broken out so getting the vent window assembly out was a breeze. I have the new glass in but can not figure how to get the vent glass back in. The part where it bolts to the inside won't go by the new window. Any help much appreciated.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.