Vaccume Diagrams for a Carter Q-Jet? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Russell · 10-25-2003, 07:10 PM

Hey everyone!!

I found out why my truck was accelerating and running so badly under pressure - only one of my carb jets is actually squirting any fuel, so I've decided to rebuild the stock carb that was on there, a Carter Q-Jet. I can get the numbers and stuff off it if it helps, but I need to know how to hook my vaccume stuff back together the way it was. I was stupid and didn't take any pictures :S

I also need to know what rebuild kit to get from NAPA as well, and I'll rebuild it tommorow night after I get back from the wrecker.

10-25-2003, 07:10 PM	#1
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Rebuilding Carter Q-Jet? Hey everyone!! I found out why my truck was accelerating and running so badly under pressure - only one of my carb jets is actually squirting any fuel, so I've decided to rebuild the stock carb that was on there, a Carter Q-Jet. I can get the numbers and stuff off it if it helps, but I need to know how to hook my vaccume stuff back together the way it was. I was stupid and didn't take any pictures :S I also need to know what rebuild kit to get from NAPA as well, and I'll rebuild it tommorow night after I get back from the wrecker. __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap) Last edited by Russell; 10-25-2003 at 07:32 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.