The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 01-06-2013, 07:19 PM   #1
Andy4639
Old member
 
Andy4639's Avatar
 
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
Cool Fixing oil leaks on my 305

Going to start this week on fixing some minor oil leaks on the front of the 305 to get it ready for the 3000 mile round trip to Texas and back in June.
I started today by putting it in the garage where I can work on it for the next few weeks without moving it. I got the air housing off so far. Just going to take my time and do a little at a time. Winter time so not much driving it anyway.




My plan is to take all the belts off and replace with new ones and keep the old ones for spares during the trip. I have oil leaking from the timing gear cover and front of the oil pan and on this model engine you have to take both loose to fix one are the other. So I'm going to replace both with new gaskets and sealer plus paint whatever I can. New cranck seal rear main seal the works. Going to pull water pump and paint it and clean up the front of the motor while at it.
New plugs wires and such also.
Anybody have any tips for me?
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71


Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour


http://upstategmtrucks.com/



Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!

LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
Andy4639 is offline   Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:21 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com