Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
01-23-2013, 05:41 PM | #9 |
Registered User
Join Date: Jan 2013
Location: Ohio
Posts: 5
|
Re: Disc Brake Upgrade Reference Thread
I attempted to do a crossmember swap on my 66 c30 and the frame widths are not the same between these. the c30 chassis is 3/8 of an inch wider than the later 73-87 crossmember. I am however going to drill out the holes to mount the newer a-arms and spindles onto the crossmember. The only question i do have is what would it take to install the inner tie rod ends of the newer 73-87 into the drag link of the 66.
|
Bookmarks |
|
|