Alternator Conversion - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Deryl · 11-02-2003, 10:39 PM

Hi guys! I'm new to this awsome board and this is my first post. I'm converting my 71 C10 to an internally regulated alternator. I've done a search, but I'm still not clear about a couple of things. There is a blue wire and a white wire going to the plug on the old alternator. Can I simply splice the new plug to these two wires after jumping the voltage regulator plug? If so which wire goes to terminal #1 and which goes to #2? Also, there was a ground on my old alternator. Do I leave that off?

11-02-2003, 10:39 PM	#1
Deryl Registered User Join Date: Oct 2003 Location: Douglasville, Ga. Posts: 125	Alternator Conversion Hi guys! I'm new to this awsome board and this is my first post. I'm converting my 71 C10 to an internally regulated alternator. I've done a search, but I'm still not clear about a couple of things. There is a blue wire and a white wire going to the plug on the old alternator. Can I simply splice the new plug to these two wires after jumping the voltage regulator plug? If so which wire goes to terminal #1 and which goes to #2? Also, there was a ground on my old alternator. Do I leave that off?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.