1949 Chevy 3600 into a daily driver - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Coach529 · 02-13-2013, 11:03 PM

Little more progress tonight.

I had to change out the races in the hubs. They stockers came out easy with a punch and hammer. I hit the hubs with a torch and left the new races in the freezer for a couple hours. Went together perfect!!

Next came packing bearings and assembly!!

I could not install the nut and cotter pin. I need to install a couple thick washers so the hole in the spindle aligns with the nut.

Money shot......Henry at ride height with 28" wheels!!

02-13-2013, 11:03 PM	#10
Coach529 Registered User Join Date: Nov 2012 Location: Post Falls, Idaho Posts: 1,757	Re: 1949 Chevy 3600 into a daily driver Little more progress tonight. I had to change out the races in the hubs. They stockers came out easy with a punch and hammer. I hit the hubs with a torch and left the new races in the freezer for a couple hours. Went together perfect!! Next came packing bearings and assembly!! I could not install the nut and cotter pin. I need to install a couple thick washers so the hole in the spindle aligns with the nut. Money shot......Henry at ride height with 28" wheels!! __________________ 1949 Chevy 3600 "Adventures of Henry" http://smu.gs/QOlhWY



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.