Z bar question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Bernie** · 11-08-2003, 04:12 PM

I'm changing from an automatic to a 4 speed in a 69 K20. I have a Z bar for the clutch linkage, but it doesn't work with the parts that I got from LMC and it doesn't look like the one in the LMC picture. The one I have is 7 1/4 inches long, has a straight tube with about 1 inch internal diameter. Could someone tell me if this is how it should be ? It would be good to check that first, before I start looking for another one. Thanks

11-08-2003, 04:12 PM	#1
Bernie Senior Member Join Date: Jan 2001 Location: Northern Illinois Posts: 516	Z bar question I'm changing from an automatic to a 4 speed in a 69 K20. I have a Z bar for the clutch linkage, but it doesn't work with the parts that I got from LMC and it doesn't look like the one in the LMC picture. The one I have is 7 1/4 inches long, has a straight tube with about 1 inch internal diameter. Could someone tell me if this is how it should be ? It would be good to check that first, before I start looking for another one. Thanks __________________ Bernie



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.