Vacuum gauge conversion kit

[VTKidder]

NOW ON EBAY.....

-- Kit --

-- Lens --

============

Everything needed to add a factory vacuum gauge to your truck; the backing lens for the gauges that says " VACUUM " (GM#6458969), the vacuum gauge (GM#6460663), the backing plate that the oil pressure and vacuum gauge mount to, and I'm including a 60lb oil pressure gauge as well, as I've got no need for it (GM#6460746). The needles are still bright orange, the lens is only worn on the 6 spots where the foam rubber bumpers are, and everything appears to be in good working condition. I have never run it though.

**EDITED** I just checked the gauge, and it does work.**

Just install the lens, install the gauge and plumb it to your intake with 3/16" steel line. I've included the fitting on the back of the gauge, you'll need a brass ferrel (spelling??) and steel line from a parts store, that's it. YearOne sells this repro kit for $216....

$80 shipped

I've also got an extra lens that reads VACUUM. These lenses do not have tach numbering. $25 shipped for the extra lens