Need whole front clip,rear bumper,steering box for 89 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**crossy** · 11-13-2003, 09:59 PM

Hey gang, I'm seroiusly looking at wrecked 89 stepside 4x4 . it took a shot in the front and needs basically a whole front silverado style clip with 4 headlights . Because it took mainly a steering gear hit it tweaked the steering box ( I assume i can buy one of these rebuilt on exchange?) . it also had many dents in the rear bumper and If i buy and redo this truck I want to make it right. I would want a nice front clip. No need to bother telling me about one with 'just a few dents here and there'.
give me your experience with aftermarket parts if you would.
I can buy GM parts wholesale but being a 73-87 guy I am not familiar with prices on this sheetmetal/bumpers.

I need to act quick on this and will most likely buy the truck regardless if i find used parts here or not .

If you live within reasonable distance of Pennsville , NJ then let me know.

Pennsville is near Wilmington Delaware , and not far from Philadelphia. Pa. :-)

Thanx for any help. DAVE all4trux@snip.net

11-13-2003, 09:59 PM	#1
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	Need whole front clip,rear bumper,steering box for 89 Hey gang, I'm seroiusly looking at wrecked 89 stepside 4x4 . it took a shot in the front and needs basically a whole front silverado style clip with 4 headlights . Because it took mainly a steering gear hit it tweaked the steering box ( I assume i can buy one of these rebuilt on exchange?) . it also had many dents in the rear bumper and If i buy and redo this truck I want to make it right. I would want a nice front clip. No need to bother telling me about one with 'just a few dents here and there'. give me your experience with aftermarket parts if you would. I can buy GM parts wholesale but being a 73-87 guy I am not familiar with prices on this sheetmetal/bumpers. I need to act quick on this and will most likely buy the truck regardless if i find used parts here or not . If you live within reasonable distance of Pennsville , NJ then let me know. Pennsville is near Wilmington Delaware , and not far from Philadelphia. Pa. :-) Thanx for any help. DAVE all4trux@snip.net __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.