Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
03-22-2013, 01:00 PM | #1 |
Registered User
Join Date: Mar 2004
Location: Hoytsville, Utah
Posts: 3,365
|
Wiring issue-wipers quit working
I went to go this morning (snowing) and my wipers all of a sudden don't work. The fuse is blown. I put in a new fuse and it blew instantly. So I know I have a dead short somewhere. The thing is, like most, there is some interesting PO wiring been done. I never was too worried about it, because everything worked.
See the two big yellow wires that are attached to the fender? I always figured that they were something to do with the camper that the PO had. But last week when I was changing my heater core, I needed a little bit of slack in these wires to drop the inner fender and when I unhooked them, I lost all power. I traced these wires and they run to the after market amp gauge, and apparently they also supply power to the whole system. This don't seem right to me. I didn't mess around with any other wires, just hooked these back up. Everything else still works, just the wipers don't. I have looked at the wiring diagram, and all the other wires involved and I can't see anything that looks shorted out anywhere. Any ideas? I can find the short OK when I have a little more time, but I just don't get why the wipers and nothing else.
__________________
'68 Panel Project Boogie Chillin' '68 C-10 Ol' Green |
Bookmarks |
|
|