250 clifford valve cover question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**slepysal** · 03-28-2013, 01:57 AM

I got a finned valve cover,and a finned air cleaner and installed them.
But I have a question about the PCV hook up.
The old valve cover had 3 holes the new one has one, plus a breather "box" on the right rear of it.
The old valve cover had two breathers on it and a pcv valve on the side going to the the bottom of the air cleaner.
My question is were can I put the pcv valve on the new valve cover and were should I hook it up? I was thinking of a pcv oil filler cap with the pcv hose hooked up to the intake ( a clifford manifold )
Or do I hae to drill the valve cover ?
Is the intake port a good place to attach the pcv? Or is the air cleaner hook up ok ?

03-28-2013, 01:57 AM	#1
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	250 clifford valve cover question I got a finned valve cover,and a finned air cleaner and installed them. But I have a question about the PCV hook up. The old valve cover had 3 holes the new one has one, plus a breather "box" on the right rear of it. The old valve cover had two breathers on it and a pcv valve on the side going to the the bottom of the air cleaner. My question is were can I put the pcv valve on the new valve cover and were should I hook it up? I was thinking of a pcv oil filler cap with the pcv hose hooked up to the intake ( a clifford manifold ) Or do I hae to drill the valve cover ? Is the intake port a good place to attach the pcv? Or is the air cleaner hook up ok ? __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.