Rear brake line/tanke hose questions

[kev2809]

67 suburban with 72 rear drums and brakes

I just finished up rebuilding my rear drums, and of course i had to cut off my brake line since it was rusted up in the wheel cylinders. i bought the new fittings and was going to try and flare the lines myself, but its tough while the lines are on the truck (other fitting also stripped since they are rusted together).


So i go to look on lmctruck.com to order a new set, and for 30 bucks for both plus shipping isnt bad. question is, they have different part numbers for a 71 and 72. what is the difference?

ALSO, since i had my truck bagged, i just moved the fuel hose and brake hose out of the way but havent secured it yet. for the pump to hardline hose, does it matter that the hardline from the frame is lower than the hose? (i raised my tank up about 3 inches) i ran a new hose to the hardline like this...and i plan on zip tieing it to the brake tee on the axle...would it pose a problem running it like this?