Tailgate cable Mod

[teamradrz1]

I've been asked about this many times so thought I would post it up. A friend sent these directions to me from a different forum so that is where the credit is due. This is a pretty easy mod that eliminates the rattle the normal brackets make and I've had it done for 4 years now with no issues.

1. Cut the T off the tailgate mounts, where the brackets connect, flush with the round stud
2. Drill and tap 8MM X 1.25MM hole in the stud to accept cable support bolt
3. Ford Ranger support bolt #N806969-S100 plus a washer for spacing (not included)
4. Ford Ranger Tailgate part #s F37Z 9943052 A, F37Z 9943053 A (left and right parts)
5. See picture...