![]() |
Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Jan 2010
Location: Brandon, Manitoba, Canada
Posts: 782
|
REALLY strange A/C issue........any GM techs on the forum?
Ok, try to make a long story as short as possible.....
Installed my cold air intake, started up the truck and gave her a couple good revs (4500 rpm) to clean out the throttle body as I had cleaned it out as well in the process. NASTY loud squeal/steam engine sound (really loud) happened, killed the truck with the key instantley. Having no clue what the hell it was, started it up and was fine. Did it again....same thing happened. Left the truck running this time and noise went away. First thought was a bearing in the pulley/tensioners etc. A/C clutch was engaging and sounded funny to me so assumed I had maybe created a high side and blew out a hose or o ring etc. Started it up to look at it again in the morning, compressor wouldn't engage. Took to a shop, reclaimed all the refrigerant, pressure tested, and refilled with no issues found on that end. (was down 3oz of refrigerant...nothing really). A/C still did not work. They checked the power going to the low/high pressure switch...nothing there, went to fuse....was good, even changed it to be sure, checked relay under hood....good. Jumped the two terminals on the relay for the a/c under the hood and everything cycles and blows ice cold with no issues says that it is working perfect on that part. Says that he went throught he wiring diagrams and figures that the "a/c module" is the issue (under the dash somewhere? but was not sure and not crazy about getting into it cause he was not familiar). Heat and everything else is fine, no appearant codes etc. Says that if the module is replaced will need to go to GM dealer or someone with a tech 2 to relearn to the body control module. If at all possible not taking it to our local GM stealership...cause they are crooked as hell. Know someone with a tech 2 so not an issue but would like to figure out and repair myself if possible. Anyone have any experience with this type of situation? Any help appreciated. 2003 GMC 1500HD with full load digital dual climate control etc. 6.0L auto 4x4....
__________________
1967 K30 4x4/12v Cummins/getrag/D60/D70/355s 1967 GMC suburban 4x4/LS swap 5.3/4500/205/10 bolt/14 bolt full floater 1963 C10 reg cab long box 1970 Chevelle 1968 Biscayne 2dr post "...there is no excuse for what I am about to do, but dangit....it's gonna be fun!" |
![]() |
![]() |
Bookmarks |
|
|