Turn signals not working - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Low87 · 04-27-2013, 04:13 PM

I'm at a total loss on this one.
Replaced the signal switch a few months ago to fix no turn signals. Worked ok til last week. Signals working ok til halfway into my drive. Signals acted funny, weird pattern, then nothing.
Took the shaft down to the switch again, all is ok.
Hazards & brake lights work.
Fuse is ok.
Harness is plugged in & snug.
All bulbs are good.

What am I missing?

Tired of running around with no signals feeling like a major a-hole. Driver window motor needs replacing, so no, I can't use hand signals.
Posted via Mobile Device

04-27-2013, 04:13 PM	#1
Low87 been here longer than Liz Join Date: Feb 2000 Location: Broken Arrow, OK Posts: 2,437	Turn signals not working I'm at a total loss on this one. Replaced the signal switch a few months ago to fix no turn signals. Worked ok til last week. Signals working ok til halfway into my drive. Signals acted funny, weird pattern, then nothing. Took the shaft down to the switch again, all is ok. Hazards & brake lights work. Fuse is ok. Harness is plugged in & snug. All bulbs are good. What am I missing? Tired of running around with no signals feeling like a major a-hole. Driver window motor needs replacing, so no, I can't use hand signals. Posted via Mobile Device __________________ ~Greg~ Mac's Garage '87 SWB 6/8 drop "Piso" '08 CCSB Silverado DD the departed '89 GMC K5 Jimmy 4x4 "Rusty Nuts" '77 Chevy K5 Blazer 2wd '83 Chevy stepside "You get what you pay for" - Mike 'swervin ervin' Ervin



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.