|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
|
|
Thread Tools | Display Modes |
05-07-2013, 08:09 AM
|
#1 |
|
1969 Custom 30 wrecker
Join Date: Sep 2001
Location: Pottsville, Pa
Posts: 2,611
|
Upper Control arm bushings (grease question)
Ok, can anyone explain to me the logic behind the grease fittings on these???
There is a fitting on the end of both the large nuts that screws on. Grease can go inside that nut but nowhere else? What good is that? Am I missing something here??? Ready to put my second set of these on due to the lousy design. One bushing is shot after only a few years. (and they squeeked on a regular basis) NEED HELP!
__________________
Bob 63 Impala 283/PG/3.36 (under restoration) 66 Impala 327/PG/3.36 66 Chevelle SS 409/M22/3.55 69 Chevelle 307/PG/3.08 (future restoration) 69 C10 short stepside 454/TH350/3.73 69 Custom 30 tow truck 350/4 spd/4.10 (resto done, CRUISIN TIME!) 71 Cheyenne 20 fleetside 350/4 spd/4.10 71 Chevelle 6/PG/3.08 72 Chevelle 454/M21/4.10 |
|
|
| Bookmarks |
|
|
Threaded Mode