Brake light is on with a new brake distribution/metering block

[derotoreut]

I decided to remove the distribution block to bench test it. Using my multimeter, I found that no matter what position the spool valve was in, the block showed continuity; even if I center the spool valve. I thought that maybe during my bench bleeding efforts I caused the spool valve to move thus making contact with the switch pin, causing it to go to ground. Nope... this unit is defective and has promptly been returned. The distribution block I bought was a model PR-112 from Inline tube http://inlinetube.com/Prop%20Valves/PR-112.htm.

Hopefully a new distribution block solves the problem. I will keep you updated.